RFS Headset Radiation Safety

A common misconception in the late 90’s was that Headsets were hailed as one of the best ways to reduce overall cranial exposure to cell phone emissions by greatly increasing the distance between the phone and head.

In 1998, RF Safe published scientific data supporting headsets increased RF Hazards greatly - especially with regards to fetal development because of relocation of the handset and wave-guide effects.

Then in 2000 there were worldwide concerns over the effectiveness of a headsets ability to greatly reduce cranial field intensity by accredited studies.

The reason for this was that under certain configurations a headset wire could act as an antenna and transmission line to channel significant emissions directly into the ear.

The British Independent Group on Mobile Phones suggested headsets would be an ideal solution if they were used with filters to stop the headset wire from acting as an effective microwave antenna.

This is exactly what RF Safe WireGuards are; it is a simple clip on Ferrite filter for maximum radiation reduction. A headset using an RF Safe WireGuard typically emits only 2-5% of the radiant energy at the earpiece that an ordinary headset would emit, so like sun block it offers a precautionary option.

Additional RF Safety measures can be taken, such as using a wired headset utilizing RF Safe earbud shields or most recommended is using an Air-Tube design headset with a WireGuard. “

Air-Tube Designs further reduce cranial exposure! The RF3 incorporates an acoustic exchange principle like a doctors stethoscope to eliminate using a wire all the way to a headsets earpiece; this extra distance truly allows RF to drop off at the square of distance.

Earbud shields are made of a thin fabric specially treated to deflect RF radiation, simply install one 5/8 O.D Earbud shield under the headsets foam earpiece cover, at this point the ear canal is sealed off from RF entering it.

NEXT
Now the only thing left to consider is the location of the cell phone handset itself! To properly shield your body from excessive RF exposure see instruction page #2:
“Cell Phone Location & RF Exposure”

Instructional Pages
(1) (2) (3)

Shield Headset Radiation!

Wires or cables connected/extending from electronic devices using radio waves (such as cell phones), if not shielded will emit over ambient rf radiation levels. To suppress high frequency rf radiation from interacting with sensitive electronics and biologic systems (cell phone users), we offer a line of clamp-on ferrite suppressors. Our ferrites aim to effectively shield the harmful electromagnetic fields from traveling along cell phone headset wires ect.

One other major concern of using a headset for hands 6.00 usage is where the phone itself is placed. When hands 6.00 use requires the phone is held near your body, proper Body Shielding must be used!

Headsets Caused My Cancer
6-14-2003

Archived Reports On Hazards Of Headset Usage Below

UK Hands6.00 Mobiles Lose Safety Approval	December 11, 2000
Government U-Turn On Hands-6.00 Mobile Phone Safety	December 09, 2000
Safety Of 'Hands-6.00' Kits Unsure	December 08, 2000
Mobile Phones: Fresh Doubts Over Safety Of Hands-6.00 Kits	November 02, 2000
Fresh Doubts Over Hands-6.00 Mobile Phones	November 02, 2000
Hands-6.00 Phone Safety Questioned	November 02, 2000
Mobile Phone Radiation Danger	November 02, 2000
New Fears Over Safety Of Mobile Kits	November 02, 2000
Hands-6.00 Kit Concerns Remain	November, 2000
Mobile Phone Safety Leaves Experts Divided	August 09, 2000
Watchdog Stands By Phones Warning	August 09, 2000
DTI and Which? At Odds Over Phone Safety	August 08, 2000
Mobile Phones Safety Muddle	August 08, 2000
Mobile Phones Alert	April 14, 2000
Yacking Yourself To Death	April 10, 2000
Danger Signals	April 07, 2000
Experts Debate Safety Of Earpieces For Cell Phone	April 06, 2000
Health Hazards Hanging On The Mobile Phone	April 06, 2000
Mobile Phone Inquiry Widens	April 06, 2000
Phone Scare - Firms Hit Back	April 04, 2000
Hands-6.00 Mobiles 'Increase Radiation Risk'	April 04, 2000